Product Description
Product information (PDF)
EPIC® Data PROFIBUS Connector (Optical Link Modul)
Data Connector D-Sub (9-pin.) for PROFIBUS DP according to IEC 61158, IEC 61784, with optical interface and repeater functionality and optical fiber interface (POF and PCF)
- Fully functioning PROFIBUS repeater with integrated optical interface
 |
 |
 |
 |
 |
 |
 |
Article List
Product description
Technical Data
| Lapp No. | Product Name | Datasheet / Product video | Request Quote | ||||||
|---|---|---|---|---|---|---|---|---|---|
| Article designation | Cable outlet | PG | Diagnostic LEDs | Pieces / PU | |||||
| EPIC® Data PROFIBUS Connectors Fiber Optic Module – HFBR connector | |||||||||
| Lapp 21700568 | EPIC Data PROFIBUS Connector (Optical Link Modul) |
  |
 |
||||||
| ED-PB-90-PG-FO-HFBR-650 | 90° | yes | yes | 1 | |||||
| EPIC® Data PROFIBUS Connectors Fiber Optic Module – SMA connector | |||||||||
| Lapp 21700569 | EPIC Data PROFIBUS Connector (Optical Link Modul) |
|
|
||||||
| ED-PB-90-PG-FO-SMA-650 | 90° | yes | yes | 1 | |||||
| EPIC® Data PROFIBUS Connectors Fiber Optic Module – BFOC(ST) connector | |||||||||
| Lapp 21700570 | EPIC Data PROFIBUS Connector (Optical Link Modul) |
|
|
||||||
| ED-PB-90-PG-FO-BFOC-650 | 90° | yes | yes | 1 | |||||
Application range
- Automation technology
- Control engineering
- Mechanical engineering
- Plant engineering
- Tool shop
Benefits
- Easy covering of large distances
- Cost-saving due to quick installation (Plug & Play)
- Galvanic isolation in case of potential differences within PROFIBUS network
- For EMC critical invironments
- Regeneration of data signal
(slope, power and mark-to-space ratio)
Product Make-up
- D-Sub plug, 9-pin, fixing screws 4-40 UNC
- Metallised housing
- With additional programming/diagnostic
interface: Sub-D socket, 9-pin - An external 24 V supply is not necessary
- Connection for optical cable (POF or PCF)
Norm references / Approvals
- D-Sub (9 pos) pin assignment in
accordance with PROFIBUS - IEC 61158, IEC 61784
Product features
- Integrated repeater functionality
- Switchable bus termination is integrated
- Diagnostic LEDs (blue, green, red, yellow)
- max. distance:
POF fiber: 65 m
PCF fiber: 250 m
| Dimensions | 64 mm x 40 mm x 17 mm (LxWxH) |
| Terminating resistor | Integrated resistor combination that is connected by a sliding switch |
| Weight | Approx. 40 g |
| Cable outlet | 90° |
| Interfaces | Connection: Sub-D socket, 9-pin FO-cable: – Polymeric-optical-fiber (POF), 650 nm – Polymer-cladded-fiber (PCF), 650 nm applicable types of connectors: SMA, BFOC(ST) and HFBR |
| Protection rating | IP 20 |
| Current consumption | typ. 100 mA |
| Transmission rate | max. 12 MBit/s |
| Degree of soiling | 2 |
| Supply voltage | +5,0 VDC (supplied from terminal) |
| Permissble ambient conditions | Operating temperature: 0°C to +60°C Transport and storage temperature: -25°C to +75°C |
© Copyright by Pertronic. All Rights Reserved.