Product Description
J-2Y(ST)Y...ST III BD
UNITRONIC® BUS CC FD P FRNC
EPIC® Data PROFIBUS Connectors ATEX Screw Terminals
Data Connectors D-Sub (9-pin.) For PROFIBUS DP according to IEC 61158, IEC 61784, with screw-connection, 90 ° cable outlet and PG (option)
- Fully compatible with market standard
SKU: 100000313
Categories: CABLES & ACCESSORIES, Connectors (D-Sub) for PROFIBUS /-DP, Data communication systems, EPIC® Data Connectors
Article List
Product description
Technical Data
Lapp No. | Product Name | Datasheet / Product video | Request Quote | ||||
---|---|---|---|---|---|---|---|
Article designation | Cable outlet | PG | Pieces / PU | ||||
EPIC® Data PROFIBUS Connectors | |||||||
Lapp 21700543 | EPIC Data PROFIBUS Connectors ATEX Screw Terminals | ||||||
ED-PB-90-ATEX | 90° | no | 1 | ||||
Lapp 21700542 | EPIC Data PROFIBUS Connectors ATEX Screw Terminals | ||||||
ED-PB-90-PG-ATEX | 90° | yes | 1 |
Application range
- Automation technology
- Mechanical engineering
- Plant engineering
- Tool shop
- Control engineering
Benefits
- For use within intrinsically-safe circuits in zone 2 areas with an
explosion hazard (explosive gas atmosphere occurs only rarely and briefly) - Standardised interfaces
- Improved electromagnetic compatibility (EMC) by metallized housing
- Easy connection of bus cables by proven srew clamp connection
- Secure PROFIBUS network connection
Product Make-up
- D-Sub plug, 9-pin, fixing screws 4-40 UNC
- Metallised housing
- Cable outlet 90°
- For cable outer diameter:
5 … 8 mm - (-PG) With additional programming/diagnostic
interface: D-Sub socket, 9-pin
Norm references / Approvals
- UL File: E331560
- D-Sub (9 pos) pin assignment in
accordance with PROFIBUS - DIN EN 60079-0:2006, DIN 60079-15:2005
category 3G zone 2
Product features
- Screw termination
- Switchable bus termination is integrated
- Switch can also be operated when the
connector is plugged and setting is
clearly visible - When used as a through connector (two cable connections, node) the switch must be in the “OFF” position. If used as a terminating connector (one cable connection, segment end), the switch must be in the “ON” position.
- If the switch is in the “ON” position the outgoing bus cable is disconnected
Dimensions | 64 mm x 40 mm x 17 mm (LxWxH) |
Terminating resistor | Integrated resistor combination that is connected by a sliding switch |
Connection type | Screwing |
Weight | Approx. 40 g |
Cable outlet | 90° |
Interfaces | PROFIBUS station: D-Sub socket, 9-pin PROFIBUS cable: 4 terminal blocks for wires up to 1.0 mm² (solid / flexible) |
Protection rating | IP20 |
Current consumption | max. 12.5 mA |
Transmission rate | max. 12 MBit/s |
Degree of soiling | 2 |
Supply voltage | 4.75 to 5.25 V DC (supplied from terminal) |
Permissble ambient conditions | Operating temperature: -20°C to +60°C Transport and storage temperature: -25°C to +80°C Relative humidity: max. 75 % at +25°C |