Product Description
Product information (PDF)
UNITRONIC® Li2YCY (TP) fine-wire
Screened data transmission cable mit PE core insulation, fine wire strands and twisted pairs
7-wire stranded conductor (UNITRONIC® Li2YCY (TP) and UNITRONIC® Li2YCYv (TP) can be used for Maxi TERMI-POINT® wiring; Overall braid minimises electrical
interference; Decoupling of circuits by means of
twisted-pair (TP) design (crosstalk effects)
- Cables for RS485/RS422
 |
Article List
Product description
Technical Data
| Lapp No. | Product Name | Datasheet / Product video | Request Quote | ||||
|---|---|---|---|---|---|---|---|
| Number of pairs and mm² per conductor | Outer diameter (mm) | Copper index (kg/km) | Weight (kg/km) | ||||
| UNITRONIC® Li2YCY (TP) fine-wire | |||||||
| Lapp 0031370 | UNITRONIC Li2YCY (TP) fine-wire 1 x 2 x 0,25 |
  |
 |
||||
| 1 x 2 x 0,25 | 5.7 | 14.0 | 38 | ||||
| Lapp 0031371 | UNITRONIC Li2YCY (TP) fine-wire 2 x 2 x 0,25 |
|
|
||||
| 2 x 2 x 0,25 | 6.9 | 28.0 | 56 | ||||
| Lapp 0031372 | UNITRONIC Li2YCY (TP) fine-wire 3 x 2 x 0,25 |
|
|
||||
| 3 x 2 x 0,25 | 7.5 | 39.6 | 64 | ||||
| Lapp 0031373 | UNITRONIC Li2YCY (TP) fine-wire 5 x 2 x 0,25 |
|
|
||||
| 5 x 2 x 0,25 | 8.3 | 50.0 | 93 | ||||
Application range
- Particularly suitable for wiring data systems with transmission rates up to 10 Megabits per second, and is qualified for the RS422 and RS485 interfaces.
- For fixed and limited flexible installation
- Can be used in dry or damp rooms
- Signal-, control- and measuring cable,for transmission of low, sensitive signals and high bit rates
- UNITRONIC® Li2YCYv (TP) with reinforced black outer sheath (Yv) is suitable for indoors and outdoors, as well as direct burial in the ground
Benefits
- 7-wire stranded conductor (UNITRONIC® Li2YCY (TP) and UNITRONIC® Li2YCYv (TP) can be used for Maxi TERMI-POINT® wiring
- Overall braid minimises electrical
interference - Decoupling of circuits by means of
twisted-pair (TP) design (crosstalk effects)
Product Make-up
- Similar to UNITRONIC® Li2YCY (TP), but with fine-wire conductor design
Norm references / Approvals
- Based on VDE 0812
Product features
- Flame-retardant according IEC 60332-1-2
| Core identification code | DIN 47100, refer to Appendix T9 |
| Mutual capacitance | At 800 Hz: max. 60 nF/km |
| Peak operating voltage | (not for power applications) 250 V |
| Classification | ETIM 5.0 Class-ID: EC000104 ETIM 5.0 Class-Description: Control cable |
| Inductivity | approx. 0.65 mH/km |
| Conductor stranding | Stranded conductor, fine-wire |
| Minimum bending radius | Occasional flexing: 15 x outer diameter Fixed installation: 6 x outer diameter |
| Short-range crosstalk attenuation | Up to 1 MHz min. 50 dB Up to 10 MHz min. 40 dB |
| Test voltage | Core/core: 2000 V Core/screen: 1000 V |
| Temperature range | Occasional flexing: -5°C to +70°C Fixed installation: -40°C to +80°C |
| Characteristic impedance | 100 ± 15 Ohm (> 1 MHz) |
© Copyright by Pertronic. All Rights Reserved.