Product Description
Product information (PDF)
UNITRONIC® BUS PB FRNC FC
Fixed installation
Halogen-free and highly flame-retardant; Cables can be used for PROFIBUS-DP as well as PROFIBUS-FMS and FIP; For use where the combination of a halogen-free outer sheath with properties similar to PUR and enhanced flame-retardance is required; Fast Connect (FC) cable design
- FRNC = Flame Retardant Non Corrosive- Reduction of flame-propagation and density and toxicity of smoke gases in the event of fire- Minimisation of damage to buildings and production facilities- Safety for staff and in areas with high density of people
 |
 |
 |
 |
 |
 |
 |
 |
 |
Article List
Product description
Technical Data
| Lapp No. | Product Name | Datasheet / Product video | Request Quote | ||||||
|---|---|---|---|---|---|---|---|---|---|
| Article designation | Number of pairs and conductor diameter (mm) | Outer diameter (mm) | Copper index (kg/km) | Weight (kg/km) | |||||
| Fixed installation | |||||||||
| Lapp 2170853 | UNITRONIC BUS PB FRNC FC |
  |
 |
||||||
| UNITRONIC® BUS PB FRNC FC | 1 x 2 x 0,64 | 8.0 | 30.1 | 75 | |||||
Application range
- This cable provides special advantages for use in sensitive areas where fire propagation must be avoided and the presence of toxic fumes would cause personal injury and damage to equipment.
Benefits
- Halogen-free and highly flame-retardant
- Cables can be used for PROFIBUS-DP as well as PROFIBUS-FMS and FIP
- For use where the combination of a halogen-free outer sheath with properties similar to PUR and enhanced flame-retardance is required
- Fast Connect (FC) cable design
Product Make-up
- Solid, bare, single-wire copper conductor
- PE core insulation
- Inner sheath, screening foil and braiding
- Thermoplastic outer sheath
- Colour: violet (RAL 4001)
Product features
- The cable is UL/CSA-approved (CMG)
- Halogen-free
- High flame retardancy in accordance with IEC 60332-3 and FT4
- Oil-resistant
- Based on the bit rates listed, in accordance with PNO specifications the following maximum cable lengths for a bus segment apply
(cable type A, PROFIBUS-DP):
93.75 kbit/s = 1200 m
187.5 kbit/s = 1000 m
500 kbit/s = 400 m
1.5 Mbit/s = 200 m
12.0 Mbit/s = 100 m
| Approvals | UL/CSA (CMG) |
| Mutual capacitance | Approx. 28.5 nF/km |
| Peak operating voltage | (not for power applications) 250 V |
| Minimum bending radius | 80mm |
| Test voltage | Core/core: 1500 V rms Core/screen: 1500 V |
| Temperature range | -30°C to +80°C |
| Characteristic impedance | (3 – 20 MHz): 150 ± 15 Ohm |
© Copyright by Pertronic. All Rights Reserved.