Product Description
Product information (PDF)
UNITRONIC® BUS ASI
The new BUS ASI LD 2 x 2.5 (Long Distance) allows even modules located further away to be connected.
AS-I power supplies can be reduced. The BUS ASI LD is downwards-compatible with version 1.5; The rubber versions are halogen-free
- LD = Long Distance
 |
 |
 |
 |
 |
 |
 |
 |
 |
Article List
Product description
Technical Data
| Lapp No. | Product Name | Datasheet / Product video | Request Quote | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Article designation | Outer sheath material | Outer sheath colour | Application | Number of cores and mm² per conductor | Copper index (kg/km) | Weight (kg/km) | |||||||
| For fixed and flexible applications (19-wire stranded conductor) | |||||||||||||
| Lapp 2170228 | UNITRONIC BUS ASI |
  |
 |
||||||||||
| UNITRONIC® BUS ASI (G) | EPDM (rubber) | yellow | Data and power transmission | 2 x 1,5 | 29.0 | 85 | |||||||
| Lapp 2170229 | UNITRONIC BUS ASI |
|
|
||||||||||
| UNITRONIC® BUS ASI (G) | EPDM (rubber) | black | Transmission of 30 V DC auxiliary power | 2 x 1,5 | 29.0 | 85 | |||||||
| Lapp 2170371 | UNITRONIC BUS ASI |
|
|
||||||||||
| UNITRONIC® BUS ASI LD (G) | EPDM (rubber) | yellow | Data and power transmission | 2 x 2,5 | 48.0 | 85 | |||||||
| Lapp 2170372 | UNITRONIC BUS ASI |
|
|
||||||||||
| UNITRONIC® BUS ASI LD (G) | EPDM (rubber) | black | Transmission of 30 V DC auxiliary power | 2 x 2,5 | 48.0 | 85 | |||||||
| Lapp 2170230 | UNITRONIC BUS ASI |
|
|
||||||||||
| UNITRONIC® BUS ASI (TPE) | TPE | yellow | Data and power transmission | 2 x 1,5 | 29.0 | 64 | |||||||
| Lapp 2170231 | UNITRONIC BUS ASI |
|
|
||||||||||
| UNITRONIC® BUS ASI (TPE) | TPE | black | Transmission of 30 V DC auxiliary power | 2 x 1,5 | 29.0 | 64 | |||||||
| Lapp 2170232 | UNITRONIC BUS ASI |
|
|
||||||||||
| UNITRONIC® BUS ASI (TPE) | TPE | red | Transmission of 230 V AC auxiliary power | 2 x 1,5 | 29.0 | 64 | |||||||
| Lapp 2170842 | UNITRONIC BUS ASI |
|
|
||||||||||
| UNITRONIC® BUS ASI (PVC) A | PVC UL/CSA (CMG) | yellow | Data and power transmission | 2 x 1,5 | 29.0 | 70 | |||||||
| Lapp 2170843 | UNITRONIC BUS ASI |
|
|
||||||||||
| UNITRONIC® BUS ASI (PVC) A | PVC UL/CSA (CMG) | black | Transmission of 30 V DC auxiliary power | 2 x 1,5 | 29.0 | 70 | |||||||
| Lapp 2170844 | UNITRONIC BUS ASI |
|
|
||||||||||
| UNITRONIC® BUS ASI (PVC) A | PVC UL/CSA (CMG) | red | Transmission of 230 V AC auxiliary power | 2 x 1,5 | 29.0 | 70 | |||||||
Application range
- Communication at sensor/actuator level
- UNITRONIC® Fieldbus
sensor-/actuator wiring - For fixed installation as well as occasional flexing at free, non-continuously recurring movement without tensile load
- The TPE version has an oil-resistant outer sheath. It is suitable for wet areas, in particular in conjunction with water-soluble cooling lubricants.
Benefits
- The new BUS ASI LD 2 x 2.5 (Long Distance) allows even modules located further away to be connected.
AS-I power supplies can be reduced. The BUS ASI LD is downwards-compatible with version 1.5. - The rubber versions are halogen-free
Product Make-up
- Extra-fine wire, tinned copper strands
- Core insulation: blue and brown
- Profiled outer sheath made of rubber (G), thermoplastic elastomers (TPE) or PVC
- Colour: yellow (RAL 1023) or black (RAL 9005)
- Colour: red (RAL 3000)
Norm references / Approvals
- ASI is standardised Europe-wide in EN 50295 and internationally in IEC 62026-2.
- PVC version has UL/CSA (CMG) approval.
- UL/CSA version: CMGc(UL)us or (UL)CL2 or AWM 300V FT4 approval
Product features
- Data and power are transmitted via an unscreened, geometrically coded two-core flat cable (protection against polarity reversal).
- The conductor is contacted by “piercing technology” within the ASI modules.
- The sensors are connected to the ASI modules (coupling modules) using round cables (connection cables).
| Peak operating voltage | Yellow: 300 V (not for power applications) Black: 300 V (not for power applications) Red: 300 V |
| Conductor resistance | 1.5 mm²: max. 13.7 Ohm/km 2.5 mm²: max. 8.21 Ohm/km |
| Minimum bending radius | Fixed installation: 12 mm Flexible use 24 mm |
| Test voltage | Core/core: 2000 V |
| Temperature range | Dependent on outer sheath material: PVC: -30°C to +90°C Other materials: -40°C to +85°C During installation: PVC -20 °C to +90 °C Other materials: -30 °C to +85 °C |
© Copyright by Pertronic. All Rights Reserved.