Product Description
Product information (PDF)
EPIC® Data CAN-Bus Connectors
Small design; Proven network connection; Easy connection of bus cables by proven srew clamp connection; Improved electromagnetic compatibility (EMC) by metallized housing; With additional 24 V DC output to supply external devices
(90° version only)
- Fully compatible with market standard
 |
 |
 |
 |
 |
 |
 |
 |
Article List
Product description
Technical Data
| Lapp No. | Product Name | Datasheet / Product video | Request Quote | ||||
|---|---|---|---|---|---|---|---|
| Article designation | Cable outlet | PG | Pieces / PU | ||||
| EPIC® data CAN bus connectors | |||||||
| Lapp 21700537 | EPIC Data CAN-Bus Connectors |
  |
 |
||||
| ED-CAN-90 | 90° | no | 1 | ||||
| Lapp 21700536 | EPIC Data CAN-Bus Connectors |
|
|
||||
| ED-CAN-90-PG | 90° | yes | 1 | ||||
| Lapp 21700538 | EPIC Data CAN-Bus Connectors |
|
|
||||
| ED-CAN-AX | 180° axial | no | 1 | ||||
Application range
- Automation technology
- Mechanical engineering
- Plant engineering
- Tool shop
- Control engineering
Benefits
- Small design
- Proven network connection
- Easy connection of bus cables by proven srew clamp connection
- Improved electromagnetic compatibility (EMC) by metallized housing
- With additional 24 V DC output to supply external devices
(90° version only)
Product Make-up
- D-Sub plug, 9-pin, fixing screws 4-40 UNC
- Metallised housing
- For cable outer diameter:
5 … 8 mm
Norm references / Approvals
- D-Sub pin assignment in
accordance with CiA (CAN in Automation) - UL File: E331560
Product features
- Screw termination
- Switchable bus termination is integrated
- The integrated, connectable terminal resistors
enable the CAN-Bus to be terminated
or connected through - When used as a through connector, the switch must be in the “OFF” position. If used as a terminating connector, the switch must be in the “ON” position.
- No loose parts
| Dimensions | 65 mm x 48 mm x 16 mm – 90° 67,5 mm x 35 mm x 17 mm – 180° (LxWxH) |
| Terminating resistor | 120 ohms integrated, and connectable with slide switch |
| Connection type | Screwing |
| Weight | Approx. 40 g |
| Cable outlet | 90° and axial |
| Interfaces | CAN bus station: D-Sub socket, 9-pin CAN bus cable: 6 terminal blocks for wires up to 0.8 mm² D-Sub pin assignment: CAN Low = Pin 2 CAN High = Pin 7 CAN Gnd = Pin 3 GND = Pin 6 (90° version only) CAN V+ = Pin 9 (90° version only) (shield = housing) |
| Protection rating | IP20 |
| Transmission rate | max. 1 MBit/s |
| Degree of soiling | 2 |
| Permissble ambient conditions | Operating temperature: 0°C to +60°C Transport and storage temperature: -25°C to +75°C Relative humidity: max. 75 % at +25°C |
© Copyright by Pertronic. All Rights Reserved.